30+ years of experience
+48 502 319 948
KOMINSET CHIMNEY KITSMatched to the boiler.
Matched to the boiler.
Ready for installation.
Ready-configured HENITOM SKS and SKSP kits create a safe, compatible air/flue route for condensing gas, pellet and oil boilers.
A complete starting set for the installation route
KOMINSET is configured for the appliance, connection and termination. Choose a single-wall flue route or a concentric air/flue solution for a closed combustion chamber.
SKS
Single-wall flue kit
A sealed positive-pressure flue kit for a suitable shaft, designed for condensing gas, pellet and oil appliances.
SKSP
Concentric air/flue kit
A pipe-in-pipe system that discharges flue gas while supplying combustion air through a separate concentric channel.
Fewer compatibility questions and a faster start on site
Boiler-matched
Adapters, reductions and connection pieces are selected for the boiler type and outlet.
Pressure tightness
Silicone seals protect the positive-pressure route against flue-gas and condensate leakage.
Installer-ready
A prepared set reduces component selection time and helps avoid missing or incompatible parts.
Safe operation
Correctly selected modules protect the installation from aggressive condensate and carbon monoxide.
CONFIGURE YOUR KIT
Three details are enough to start
Send these details with the quotation request and the technical team can prepare the correct starting configuration:
Boiler and fuel
Provide the manufacturer, model, output and whether the appliance uses gas, pellet or heating oil.
Outlet and route
Confirm the outlet diameter, shaft or wall route, required length, offsets and connection position.
Termination and finish
Choose the roof or wall termination and any required colour, rosette, reduction or transition.
COMPATIBLE APPLICATIONS
Designed for modern low-temperature boiler installations
The final system must be selected for the appliance documentation, route and local requirements. Positive-pressure installations require correctly fitted seals and compatible system components.
- ◆Condensing gas
- ◆Pellet
- ◆Heating oil
- ◆Turbo boiler
- ◆Closed chamber
TECHNICAL OVERVIEW
Important KOMINSET parameters
- Operating mode
- Positive pressure, classification P1 200 Pa
- Maximum temperature
- Up to 200°C
- System bases
- SKS single-wall and SKSP concentric air/flue
- Fuels
- Gas, pellet and heating oil
- Tightness
- Silicone sealing rings for pressure and condensate resistance
- Material
- Acid-resistant stainless steel
- Configuration
- Boiler-specific adapters, reductions, fittings and terminals
- Options
- Selected diameters, lengths and colour variants
Frequently asked questions
What is included in a KOMINSET kit?+
The exact content depends on the boiler and route. A typical set includes a boiler connection, adapters or reductions, required flue modules and a suitable termination.
What is the difference between SKS and SKSP?+
SKS is a single-wall sealed flue route. SKSP is concentric: the inner pipe removes flue gases and the outer channel supplies combustion air.
Can one universal kit fit every boiler?+
No. Boiler outlets and manufacturer requirements differ, so adapters, reductions, seals and terminals must be matched to the appliance.
Can pipe lengths be changed?+
Yes. The route is modular and the lengths, elbows and transitions can be configured to the project.
Who should install the kit?+
A qualified installer should assemble and commission the complete air/flue system according to the appliance instructions and applicable rules.
A COMPLETE SET STARTS WITH THE BOILER DATA
Let us configure the KOMINSET for your appliance.
Send the boiler model, outlet diameter, route length and a simple sketch. We will prepare the right SKS or SKSP starting set.